25 ft Flagpoles
A 25 ft flagpole is the perfect middle ground between visibility and ease of installation. At Liberty Flagpoles, every 25 ft model is built in the USA from marine-grade 6063-T6 aluminum or high-strength fiberglass. Choose from:
-
Telescoping Poles for tool-free height adjustment and seasonal flexibility
-
Sectional Poles that bolt together for compact shipping and permanent installs
-
Fiberglass Options that resist corrosion and flex under load
-
Aluminum Poles with reinforced wall thickness for all-weather durability
-
Residential-Style designs to complement home landscapes
-
Commercial-Grade poles engineered for schools, businesses, and government facilities
-
Hurricane-Series poles with vibration-dampening cores for extreme wind zones
All pole models offer your choice of halyard system (external or internal), stainless-steel hardware, and multiple finish options—so you get the exact configuration you need, backed by veteran-owned craftsmanship and lifetime support.
Installation Tips for 25 ft Poles
-
Foundation Preparation: Excavate a 24″ deep × 12″ diameter hole. Insert our galvanized pour-in sleeve plumb and level.
-
Concrete Setting: Pour at least 400 lb-ft of concrete. Allow a minimum of 48 hours curing time before raising the pole.
-
Pole Assembly:
-
Sectional Models: Bolt each segment together with the supplied stainless hardware.
-
Telescoping Models: Extend and lock collars at the desired height, ensuring each collar fully engages.
-
-
Halyard Attachment: Feed the rope through the truck (top pulley), tie off at the cleat, then test raise/lower action.
-
Flag Mounting: Use heavy-duty snap hooks or S-clips. Hang a 3′×5′ or 4′×6′ cotton/nylon flag and cycle it several times to confirm smooth operation.
-
Routine Maintenance: Twice yearly, rinse the pole with fresh water, inspect halyards, tighten screws, and lubricate moving parts.
Accessories & Add-Ons
-
Halyard Kits (internal/external) with UV-resistant rope & cleat
-
Snap Hooks & Cleats in brass or stainless steel
-
LED Flagpole Lighting (solar or hardwired)
-
Finials & Tops (ball, eagle, gold-tone, matte black)
-
Ground Sleeves & Anchors for temporary or permanent setups
Frequently Asked Questions
What flag size works best on a 25 ft pole?
A 3′×5′ flag offers optimal fly on a 25 ft pole; for higher-visibility sites consider a 4′×6′ or 5′×8′ flag.
Do I need a permit to install a 25 ft flagpole?
Regulations vary—many areas permit up to 25 ft without special approval, but always verify with local building codes and HOA guidelines.
Should I choose aluminum or fiberglass for a coastal property?
Fiberglass resists salt-air corrosion and flexes under wind loads, making it ideal for coastal zones. Marine-grade aluminum with a corrosion-resistant finish is also a solid choice.
What’s the advantage of telescoping vs. sectional poles?
Telescoping poles let you adjust height seasonally (e.g., shorter in winter), while sectional poles offer simpler, permanent installation with no moving collars.
How do I add lighting to my 25 ft flagpole?
Install an LED flagpole light kit at the truck (top) or alongside the halyard. Solar-powered kits require no wiring, while hardwired options deliver brighter, all-night illumination.
